Troubleshooting We are always keen to resolve any problem.
SOLUTION What is car corrosion and how can you avoid it? Do it yourself
Origin Moisture penetration on the coated surface through a deep scratch or crack on the surface. Improper treatment of the substrate with anticorrosive primer.
Avoidance Inspection of car body for deep scratches, cracks or bare metal areas that need to be protected.
How To Fix The Problem! Remove the affected paint areas and sandblast them if necessary. Use neutralizing acid on the sandblasted area and refinish with an approved anticorrosive system.
02   Faq Got a question? Try finding the answer right away, on the list below. If this doesn’t work, do contact us for more.
  • Can products be transported in temperatures bellow 0°C?

    Most of the products, made by HB BODY SA, are solvent-based, so transportation below 0°C should not be a problem. Products that have problems at low temperatures are products based in water, for the sole reason that water freezes at 0°C


  • Which is the lowest recommended temperature for product application?

    The ideal temperature for product application is room temperature and that is 21°C. Product application becomes difficult at temperatures with large deviations from the ideal since the application viscosity increases or decreases (temperature dependent). The lowest recommended product application is about 5-8°C for primers, paints, clear coats and underbody applications. The commonest application temperature for putties is 5°C.


  • What is the shelf-life of a product?

    The shelf life of our products is indicated on each Technical Data Sheet (TDS) and outlines the period during which optimal quality and effectiveness are ensured. Proper storage conditions (+5°C - +25°C) (41°F - 77°F), intact packaging, and sealing are essential for maintaining product performance.

    Shelf life can vary between product categories and even among products within the same category due to variations in formulation, materials, and ingredients. To guarantee lasting quality, it's crucial to adhere to recommended storage conditions, including avoiding exposure to humidity levels above 80% and direct sunlight.


We are always happy to fill in any information gaps. Button: Contact us now!
For any information Contact us